Application Instructions



Sports Film
Heat transfer to cotton, polyester, cotton/polyester blends, polyester mesh and other non-silicone treated materials.
  • Pre-heat garment.
  • Lay the cut design in the desired position.
  • Cover with a CLEAN cover sheet.
  • Heat seal at 320 degrees F. for 10 seconds with light-to-medium pressure.

    (Note: Press settings may vary - always pre-test on scrap material.)
    The cover sheet may have some residue after heat-sealing. After it cools, the residue can be wiped away.



    Sports Grip
    Heat transfer to nylon meshes and knits, as well as tightly-woven polyester, cotton, cotton/polyester blends, polyester mesh and other non-silicone treated fabrics.

  • Pre-heat garment.
  • Lay the cut design in the desired position.
  • Cover with a CLEAN cover sheet.
  • Heat seal at 320 degrees F. for 10 seconds with light-to-medium pressure.
    (Note: Press settings may vary - always pre-test on scrap material.)
    The cover sheet may have some residue after heat-sealing. After it cools, the residue can be wiped away.